Alcatel-Lucent 7750 SR Manual page 1828

Show, Clear, Debug Commands
A:ALA-49#
interface
Syntax interface [ip-address | ip-int-name] [detail]
Context show>service>id
Description Displays information for the IP interfaces associated with the service.
If no optional parameters are specified, a summary of all IP interfaces associated to the service are
displayed.
Parameters
ip-address — The IP address of the interface for which to display information.
ip-int-name — The IP interface name for which to display information.
detail — Displays detailed IP interface information.
Output Show Service-ID Interface — The following table describes show service-id interface output
Page 1828
Values 1.0.0.0 — 223.255.255.255
Default
IP interface summary output.
fields:
Label
Interface-Name
Type
IP-Address
Adm
Opr
Interface
If Name
Admin State
Oper State
IP Addr/mask
Details
If Index
If Type
Port Id
SNTP B.Cast
The name used to refer to the interface.
Specifies the interface type.
Specifies the IP address/IP subnet/broadcast address of the interface.
The desired state of the interface.
The operating state of the interface.
The name used to refer to the interface.
The desired state of the interface.
The operating state of the interface.
Specifies the IP address/IP subnet/broadcast address of the interface.
The index corresponding to this interface. The primary index is 1. For
example, all interfaces are defined in the Base virtual router context.
Specifies the interface type.
Specifies the SAP's port ID.
Specifies whether SNTP broadcast client mode is enabled or disabled.
Description
7750 SR OS Services Guide