Alcatel-Lucent 7750 SR Manual page 1850
Os services guide
Hide thumbs
Also See for 7750 SR:
- Service manual (1506 pages) ,
- Interface configuration manual (628 pages) ,
- System configuration manual (484 pages)
Table of Contents
Advertisement
Show, Clear, Debug Commands
Page 1850
Label
Multihop
Multipath
Prefix Limit
Passive
Next Hop Self
Aggregator ID 0
Remove Private
Damping
Export Policy
Import Policy
Hold Time
Keep Alive
Cluster Id
Client Reflect
Description (Continued)
The maximum number of router hops a BGP connection can traverse.
The configured or inherited multipath value, determining the maxi-
mum number of ECMP routes BGP can advertise to the RTM.
No Limit — No route limit assigned to the BGP peer group.
1 - 4294967295 — The maximum number of routes BGP can
learn from a peer.
Disabled — BGP attempts to establish BGP connections with
neighbors in the specified peer group.
Enabled — BGP will not actively attempt to establish BGP connec-
tions with neighbors in the specified peer group.
Disabled — BGP is not configured to send only its own IP address
as the BGP nexthop in route updates to neighbors in the peer group.
Enabled — BGP sends only its own IP address as the BGP nexthop
in route updates to neighbors in the specified peer group.
Disabled — BGP is not configured to set the aggregator ID to
0.0.0.0 in all originated route aggregates sent to the neighbor in the
peer group.
Enabled — BGP is configured to set the aggregator ID to 0.0.0.0 in
all originated route aggregates sent to the neighbor in the peer group.
Disabled — BGP will not remove all private AS numbers from the
AS path attribute in updates sent to the neighbor in the peer group.
Enabled — BGP removes all private AS numbers from the AS path
attribute in updates sent to the neighbor in the peer group.
Disabled — The peer group is configured not to dampen route
flaps.
Enabled — The peer group is configured to dampen route flaps.
The configured export policies for the peer group.
The configured import policies for the peer group.
The configured hold time setting.
The configured keepalive setting.
None — No cluster ID has been configured.
Disabled — The BGP route reflector will not reflect routes to this
neighbor.
Enabled — The BGP route reflector is configured to reflect routes
to this neighbor.
7750 SR OS Services Guide
Advertisement
Table of Contents
