Alcatel-Lucent 7750 SR Manual page 1918

Show, Clear, Debug Commands
Page 1918
Label
Number of SDPs
Service Id
Port Id
Description
Encap Value
Admin State
Oper State
Last Changed
Admin MTU
Oper MTU
Ingress qos-pol-
icy
Egress qos-policy
Ingress Filter-Id
Egress Filter-Id
Multi Svc Site
Ingress sched-
policy
Egress sched-pol-
icy
Acct. Pol
Collect Stats
Dropped
Offered Hi Prior-
ity
Offered Low Prior-
ity
Forwarded In Pro-
file
Forwarded Out Pro-
file
Description (Continued)
The total number SDPs applied to this service ID.
The service identifier.
The ID of the access port where this SAP is defined.
Generic information about the SAP.
The value of the label used to identify this SAP on the access port.
The desired state of the SAP.
The operating state of the SAP.
The date and time of the last change.
The desired largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
The SAP ingress QoS policy ID.
The SAP egress QoS policy ID.
The SAP ingress filter policy ID.
The SAP egress filter policy ID.
Indicates the multi-service site that the SAP is a member of.
Indicates the ingress QoS scheduler for the SAP.
Indicates the egress QoS scheduler for the SAP.
Indicates the accounting policy applied to the SAP.
Specifies whether accounting statistics are collected on the SAP.
The number of packets or octets dropped.
The number of high priority packets, as determined by the SAP ingress
QoS policy.
The number of low priority packets, as determined by the SAP ingress
QoS policy.
The number of in-profile packets or octets (rate below CIR) forwarded.
The number of out-of-profile packets or octets (rate above CIR) for-
warded.
7750 SR OS Services Guide