Alcatel-Lucent 7750 SR Manual page 1726

Show, Clear, Debug Commands
sap
Syntax [no] sap sap-id
Context debug>service>id>stp
Description This command enables STP debugging for a specific SAP.
Parameters
sap-id — Specifies the physical port identifier portion of the SAP definition. See
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>stp
Description This command enables STP debugging for a specific SDP.
interface
Syntax [no] interface [ip-int-name | ip-address]
Context debug>router>igmp
Description
This command enables debugging on the IGMP interface.
Parameters
ip-int-name — Only displays the information associated with the specified IP interface name.
ip-address — Only displays the information associated with the specified IP address.
mcs
Syntax [no] mcs [ip-int-name]
Context debug>router>igmp
Description This command enables debugging for IGMP MCS.
Parameters ip-int-name — Only displays the information associated with the specified IP interface name.
misc
Syntax [no] misc
Context debug>router>igmp
Description
This command enables debugging for IGMP miscellaneous.
Page 1726
Command Descriptions on page 1933 for command syntax.
7750 SR OS Services Guide
Common CLI