Alcatel-Lucent 7750 SR Manual page 1849

Parameters
name — Displays information for the BGP group specified.
detail — Displays detailed information.
Output Standard and Detailed Group Output — The following table describes the standard and
detailed command output fields for a BGP group:
Sample Output
7750 SR OS Services Guide
Down - BGP global process is administratively shutdown and not running.
Disabled - BGP global process is operationally disabled. The process must be restarted by the
operator.
Label
Group
Group Type
State
Peer AS
Local AS
Local Address
Loop Detect
Connect Retry
Local Pref
MED Out
Min Route Advt.
Min AS Originate
BGP group name
No Type — Peer type not configured.
External — Peer type configured as external BGP peers.
Internal — Peer type configured as internal BGP peers.
Disabled — The BGP peer group has been operationally disabled.
Down — The BGP peer group is operationally inactive.
Up — The BGP peer group is operationally active.
The configured or inherited peer AS for the specified peer group.
The configured or inherited local AS for the specified peer group.
The configured or inherited local address for originating peering for
the specified peer group.
The configured or inherited loop detect setting for the specified peer
group.
The configured or inherited connect retry timer value.
Authentication
None — No authentication is configured.
MD5 — MD5 authentication is configured.
The configured or inherited local preference value.
The configured or inherited MED value assigned to advertised routes
without a MED attribute.
The minimum amount of time that must pass between route updates for
the same IP prefix.
The minimum amount of time that must pass between updates for a
route originated by the local router.
VPRN Show Commands
Description
Page 1849