Alcatel-Lucent 7750 SR Manual page 1556

Show, Clear, Debug Commands
sap
Syntax sap sap-id [detail]
Context show>service>id
Description This command displays information for the SAPs associated with the service. If no optional parame-
ters are specified, a summary of all associated SAPs is displayed.
Parameters
sap-id — The ID that displays SAPs for the service in the form slot/mda/port[.channel]. See Common
interface interface-name — Displays information for the specified IP interface.
ip-address ip-address — Displays information associated with the specified IP address.
detail — Displays detailed information.
wholesaler service-id — The VPRN service ID of the wholesaler. When specified in this context,
detail — Displays detailed information for the SAP.
Output Show Service-ID SAP — The following table describes show service SAP fields:
Page 1556
CLI Command Descriptions on page 1933 for command syntax.
SAP, SDP, interface, IP address and MAC parameters are ignored.
Values
1 — 2147483648
Label
Service Id
SAP
Encap
Ethertype
Admin State
Oper State
Flags
Last Status Change
Last Mgmt Change
The service identifier.
The SAP and qtag.
The encapsulation type of the SAP.
Specifies an Ethernet type II Ethertype value.
The administrative state of the SAP.
The operating state of the SAP.
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown,
InterfaceAdminDown, PortOperDown, PortMTUTooSmall,
L2OperDown, SapIngressQoSMismatch, SapEgressQoSMis-
match,RelearnLimitExceeded, RxProtSrcMac, ParentIfAdminDown,
NoSapIpipeCeIpAddr, TodResourceUnavail, TodMssResourceU-
navail, SapParamMismatch, CemSapNoEcidOrMacAddr, StandBy-
ForMcRing, ServiceMTUTooSmall,
SapIngressNamedPoolMismatch, SapEgressNamedPoolMismatch,
NoSapEpipeRingNode.
The time of the most recent operating status change to this SAP.
The time of the most recent management-initiated change to this SAP.
Description
7750 SR OS Services Guide