Alcatel-Lucent 7750 SR Manual page 1874

Show, Clear, Debug Commands
Sample Output
*A:ALA-12#
==============================================================================
Page 1874
Label
Recv Mode
Metric In
Metric Out
Split Horizon
Check Zero
Message Size
Preference
Auth. Type
Update Timer
Timeout Timer
Export Policies
Import Policies
show router 3 rip peers
Description (Continued)
None — Specifies that no RIP messages are sent (i.e., silent listener).
RIPv1 — Specifies that RIPv1 formatted messages are sent to the
broadcast address.
Both — Specifies that RIP updates in either version 1 or version 2
format will be accepted.
None — Specifies that RIP updates will not be accepted.
RIPv1 — Specifies that RIP updates in version 1 format only will be
accepted.
RIPv2 — Specifies that RIP updates in version 2 format only will be
accepted.
The metric value added to routes received from a RIP neighbor.
The value added to routes exported into RIP and advertised to RIP
neighbors.
Disabled — Split horizon disabled for the neighbor.
Enabled — Split horizon and poison reverse enabled for the neigh-
bor.
Disabled — Checking of the mandatory zero fields in the RIPv1
and RIPv2 specifications are not checked allowing receipt of RIP mes-
sages even if mandatory zero fields are non-zero for the neighbor.
Enabled — checking of the mandatory zero fields in the RIPv1 and
RIPv2 specifications and rejecting non-compliant RIP messages is
enabled for the neighbor.
The maximum number of routes per RIP update message.
The preference of RIP routes from the neighbor.
Specifies the authentication type.
The current setting of the RIP update timer value expressed in seconds.
The current RIP timeout timer value expressed in seconds.
The export route policy that is used to determine routes advertised to all
peers.
The import route policy that is used to determine which routes are
accepted from RIP neighbors.
7750 SR OS Services Guide