Alcatel-Lucent 7750 SR Manual page 1587

sap-using
Syntax sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] filter filter-id
sap-using [sap sap-id]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using authentication-policy auth-plcy-name
sap-using [ingress | egress] qos-policy qos-policy-id
Context show>service
Description
This command displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters ingress — Specifies matching an ingress policy.
egress — Specifies matching an egress policy.
qos-policy qos-policy-id — The ingress or egress QoS Policy ID for which to display matching
atm-td-profile td-profile-id — Displays SAPs using this traffic description.
filter filter-id — The ingress or egress filter policy ID for which to display matching SAPs.
authentication auth-plcy-name — The session authentication policy for which to display matching
sap-id — Specifies the physical port identifier portion of the SAP definition. See
interface — Specifies matching SAPs with the specified IP interface.
ip-address — The IP address of the interface for which to display matching SAPs.
ip-int-name — The IP interface name for which to display matching SAPs.
Output Show Service SAP — The following table describes show service SAP output fields:
i
7750 SR OS Services Guide
SAPs.
Values
1 — 65535
Values
1 — 65535
SAPs.
Command Descriptions on page 1933
Values
1.0.0.0 — 223.255.255.255
Label
Port ID
Svc ID
SapMTU
I.QoS
I.MAC/IP
for command syntax.
The ID of the access port where the SAP is defined.
The service identifier.
The SAP MTU value.
The SAP ingress QoS policy number specified on the ingress SAP.
The MAC or IP filter policy ID applied to the ingress SAP.
VPLS Show Commands
Common CLI
Description
Page 1587