Alcatel-Lucent 7750 SR Manual page 1513

Show Commands
eth-cfm
Syntax eth-cfm
Context show
Description This command enables the context to display eth-cfm information.
eth-tunnel
Syntax eth-tunnel {aps|status}
eth-tunnel tunnel-index [path path-index] [detail]
Context show
Description This command displays ethernet tunnel information. Any data SAP missing a tag for a defined path
has the EthTunTagMismatch flag generated. In the example provided below, SAP eth-tunnel-1:1
does not have the tag for path 2 configured. Therefore, it is operationally down with the reason
indicated by the EthTunTagMismatch flag.
Parameters
tunnel-index — Specifies the tunnel index.
Values
path-index — Specifies the path index.
Values
detail — Keyword; displays detailed information
status — Keyword; displays ethernet tunnel status information.
aps — Keyword; displays APS ethernet tunnel information.
Sample Output
*A:Dut-C>show>service>id# show eth-tunnel status
=============================================================================
Ethernet Tunnel Groups (Status information)
=============================================================================
Tunnel Admin
ID
-----------------------------------------------------------------------------
1
2
65
7750 SR OS Services Guide
1..1024
1..16
Oper Member Information
State State Path
Up Up 1 - 1/1/2
2 - 3/1/3
Up Up 1 - 3/1/1
2 - 3/1/3
Up Up 3 - 2/1/4
8 - 1/1/3
Tag State Ctrl-MEP CC-Intvl Defects
4030 Up Yes
4031 Up Yes
100 Up Yes
4032 Up Yes
65.4003 Up -
65.4008 Up -
Service Commands
MEP Information
1 -----
1 -----
1 -----
1 -----
- -----
- -----
Page 1513