Alcatel-Lucent 7750 SR Manual page 1818

Show, Clear, Debug Commands
Sample Output
*A:ALA-12# show service id 1 base
===============================================================================
Service Basic Information
===============================================================================
Service Id
Service Type
Customer Id
Last Status Change: 02/01/2007 09:11:39
Last Mgmt Change
Admin State
Route Dist.
AS Number
ECMP
Max Routes
Page 1818
Label
Description
Customer Id
Last Mgmt Change
Adm
Oper
Mtu
Def. Mesh VC Id
SAP Count
SDP Bind Count
Identifier
Type
AdmMTU
OprMTU
Opr
: 1
: VPRN
: 1
: 02/01/2007 09:11:46
: Up
: 10001:1
: 10000
: Enabled
: No Limit
Generic information about the service.
The customer identifier.
The date and time of the most recent management-initiated change to
this customer.
The desired state of the service.
The operating state of the service.
The largest frame size (in octets) that the service can handle.
This object is only valid in services that accept mesh SDP bindings. It is
used to validate the VC ID portion of each mesh SDP binding defined
in the service.
The number of SAPs defined on the service.
The number of SDPs bound to the service.
Specifies the service access (SAP) and destination (SDP) points.
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on the SDP.
Specifies the desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
Specifies the actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
The operating state of the SDP.
Vpn Id
Oper State
Router Id
ECMP Max Routes
Auto Bind
Description
: 0
: Down
: 10.10.10.103
: 8
: LDP
7750 SR OS Services Guide