Alcatel-Lucent 7750 SR Manual page 1841

Os services guide
Hide thumbs Also See for 7750 SR:
Table of Contents

Advertisement

subscriber-hosts
Syntax
subscriber-hosts [sap sap-id ] [ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-
profile-name] [sla-profile sla-profile-name] [detail]
subscriber-hosts [detail] wholesaler service-id
Context
show>service>id
Description
This command displays subscriber host information.
Parameters
sap sap-id — Displays the specified subscriber host SAP information. See
ip-address/mask — The IP address of the IP interface. The ip-address portion of the address
ieee-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
sub-profile sub-profile-name — Specifies an existing subscriber profile name to be associated with
sla-profile sla-profile-name — Specifies an existing SLA profile name to be associated with the
detail — Displays detailed information.
wholesaler service-id — The VPRN service ID of the wholesaler.
aggregate
Syntax
aggregate [active]
Context
show>router
Description
This command displays aggregated routes.
Parameters
active — This keyword filters out inactive aggregates.
Output
Show Aggregate Output Fields — The following table describes router aggregate output fields.
7750 SR OS Services Guide
Descriptions on page 1933
command specifies the IP host address that will be used by the IP interface within the subnet.
This address must be unique within the subnet and specified in dotted decimal notation.
Values
1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
mask: 1 — 32
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-
profile context.
static subscriber host. The SLA profile is configured in the config>subscr-mgmt>sla-profile
context.
Values
1 — 2147483648
Label
Prefix
Summary
for command syntax.
Displays the destination address of the aggregate route in dotted
decimal notation.
Specifies whether the aggregate or more specific components are
advertised.
VPRN Show Commands
Common CLI Command
Description
Page 1841

Advertisement

Table of Contents
loading

Table of Contents