Alcatel-Lucent 7750 SR Manual page 1899

Syntax [no] sap sap-id
Context debug>service>id>host-connectivity-verify
Description
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular
SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See
sap
Syntax [no] sap sap-id
Context debug>service>id
debug>service>id>dhcp
debug>service>stp
Description This command enables STP debugging for a specific SAP.
The no form of the command disables debugging.
Parameters
sap-id — Specifies the physical port identifier portion of the SAP definition. See
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>id
debug>service>id>dhcp
debug>service>stp
Description
This command enables STP debugging for a specific SDP.
The no form of the command disables debugging.
event-type
Syntax [no] event-type {config-change | svc-oper-status-change | sap-oper-status-change |
sdpbind-oper-status-change}
Context debug>service>id
Description This command enables debugging for a particular event type.
The no form of the command disables debugging.
7750 SR OS Services Guide
Command Descriptions on page 1933
Command Descriptions on page 1933
VPRN Debug Commands
for command syntax.
for command syntax.
Common CLI
Common CLI
Page 1899