Alcatel-Lucent 7750 SR Manual page 1832

Show, Clear, Debug Commands
sap
Syntax sap sap-id [detail]]
Context show>service>id
Description Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — The ID that displays SAPs for the service. See
detail — Displays detailed information for the SAP.
Output Show Service-ID SAP — The following table describes show service SAP fields:
Sample Output
Page 1832
page 1933 for command syntax.
Label
Service Id
SAP
Encap
Ethertype
Admin State
Oper State
Flags
Last Status Change
Last Mgmt Change
Admin MTU
The service identifier.
The SAP and qtag.
The encapsulation type of the SAP.
Specifies an Ethernet type II Ethertype value.
The administrative state of the SAP.
The operating state of the SAP.
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown,
SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooS-
mall, SapIngressNamedPoolMismatch, SapEgressNamedPoolMis-
match, NoSapEpipeRingNode.
Specifies the time of the most recent operating status change to this
SAP
Specifies the time of the most recent management-initiated change to
this SAP.
The desired largest service frame size (in octets) that can be transmitted
through the SAP to the far-end router, without requiring the packet to be
fragmented.
Common CLI Command Descriptions on
Description
7750 SR OS Services Guide