Alcatel-Lucent 7750 SR Manual page 1658

Os services guide
Hide thumbs Also See for 7750 SR:
Table of Contents

Advertisement

Show, Clear, Debug Commands
Page 1658
Label
I. Lbl
Admin Path MTU
Oper Path MTU
Far End
Delivery
Admin State
Oper State
Ingress Label
Egress Label
Last Changed
Signaling
Admin State
Oper State
Hello Time
Max Drop Count
Hello Msg Len
Hold Down Time
I. Fwd. Pkts.
I. Dro. Pkts
E. Fwd. Pkts.
E. Fwd. Octets
Description (Continued)
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU
(when one is set) or the dynamically computed tunnel MTU, when no
admin path MTU is set (the default case.)
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
Specifies the type of delivery used by the SDP: GRE or MPLS.
The administrative state of this SDP.
The current status of the SDP.
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by the SDP.
The date and time of the most recent change to the SDP.
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
The administrative state of the Keepalive process.
The operational state of the Keepalive process.
Specifies how often the SDP echo request messages are transmitted on
this SDP.
Specifies the maximum number of consecutive SDP Echo Request
messages that can be unacknowledged before the keepalive protocol
reports a fault.
Specifies the length of the SDP echo request messages transmitted on
this SDP.
Specifies the amount of time to wait before the Keepalive operating
status is eligible to enter the alive state.
Specifies the number of forwarded ingress packets.
Specifies the number of dropped ingress packets.
Specifies the number of forwarded egress packets.
Specifies the number of forwarded egress octets.
7750 SR OS Services Guide

Advertisement

Table of Contents
loading

Table of Contents