Alcatel-Lucent 7750 SR Manual page 1780

Show, Clear, Debug Commands
mac ieee-address — Specifies the 48-bit MAC address for the static ARP in the form
statistics
Syntax statistics [ip-int-name | ipv6-address]
Context clear>router>dhcp6
Description
This command clears DHCP6 statistics.
Parameters ip-int-name — Specifies the IP interface name up to 32 characters inlength.
ip-address ipv6-address/prefix-length — The IP address of the IP interface. The ip-address portion of
statistics
Syntax statistics [sap sap-id | sdp sdp-id:vc-id | interface ip-address | ip-int-name]
Context clear>service>id>dhcp
Description This command clears DHCP statistics.
Parameters
sap sap-id — Clears the specified SAP information. See Common CLI Command Descriptions on
sdp sdp-id — The specified SDP to be cleared.
vc-id — The virtual circuit ID on the SDP ID to be cleared.
interface ip-address — The interface IP address.
Page 1780
Values ipv6-address
prefix-length
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC
addresses.
the address command specifies the IP host address that will be used by the IP interface within
the subnet. This address must be unique within the subnet and specified in dotted decimal
notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support
of /31 subnets).
Values ipv6-address
prefix-length
page 1933 for command syntax.
Values 1 — 17407
Values
1 — 4294967295
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0 — FFFF]H
d [0 — 255]D
1 — 128
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0 — FFFF]H
d [0 — 255]D
1 — 128
7750 SR OS Services Guide