Alcatel-Lucent 7750 SR Manual page 1927

sap
Syntax
Context
Description
Parameters
Output
7750 SR OS Services Guide
Label
E. Lbl
sap sap-id [detail]
show>service>id
This command displays information for the SAPs associated with the service. If no optional parame-
ters are specified, a summary of all associated SAPs is displayed.
sap-id — The ID that displays SAPs for the service. See
page 1933 for command syntax.
interface interface-name — Displays information for the specified IP interface.
ip-address ip-address — Displays information associated with the specified IP address.
detail — Displays detailed information.
wholesaler service-id — The VPRN service ID of the wholesaler. When specified in this context,
SAP, SDP, interface, IP address and MAC parameters are ignored.
Values
1 — 2147483648
detail — Displays detailed information for the SAP.
Show Service-ID SAP — The following table describes show service SAP fields:
Label
Service Id
SAP
Encap
Ethertype
Admin State
Oper State
Flags
Description (Continued)
The VC label used by this device to send packets to the far-end device
in this service by the SDP.
The service identifier.
The SAP and qtag.
The encapsulation type of the SAP.
Specifies an Ethernet type II Ethertype value.
The administrative state of the SAP.
The operating state of the SAP.
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown,
SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooS-
mall, SapIngressNamedPoolMismatch, SapEgressNamedPoolMis-
match, NoSapEpipeRingNode.
Common CLI Command Descriptions on
Description
Page 1927