Alcatel-Lucent 7750 SR Manual page 1884

Show, Clear, Debug Commands
*A:ALA-12# show router 3 static-arp to-ser1
==============================================================================
ARP Table
==============================================================================
IP Address
------------------------------------------------------------------------------
10.200.0.253
===============================================================================
S*A:ALA-12#
*A:ALA-12# show router 3 static-arp mac 00:00:5a:40:00:01
==============================================================================
ARP Table
==============================================================================
IP Address
-------------------------------------------------------------------------------
10.200.0.253
==============================================================================
*A:ALA-12#
static-route
Syntax static-route [ip-prefix /mask] | [preference preference] | [next-hop ip-addr] [detail]
Context show>router
Description This command displays the static entries in the routing table.
If no options are present. all static routes are displayed sorted by prefix.
Parameters
ip-prefix /mask — Displays static routes only matching the specified ip-prefix and mask.
preference preference — Only displays static routes with the specified route preference.
next-hop ip-addr — Only displays static routes with the specified next hop IP address.
detail — Displays detailed information about the static route.
Output Show Static Route Output — The following table describes the output fields for the static route
table:
Page 1884
MAC Address
00:00:5a:40:00:01 00:00:00 Sta
MAC Address
00:00:5a:40:00:01 00:00:00 Sta
Values 0 — 65535
Label
IP Addr/mask
Pref
Metric
Type
Age Type Interface
Age Type Interface
The static route destination address and mask.
The route preference value for the static route.
The route metric value for the static route.
BH — The static route is a black hole route. The
type of route is
black-hole
ID — The static route is an indirect route, where the
type of route is the non-directly connected next hop.
to-ser1
to-ser1
Description
Nexthop
.
7750 SR OS Services Guide
for this
for this
nexthop