Alcatel-Lucent 7750 SR Manual page 1913

Parameters
Output
service-using
Syntax
7750 SR OS Services Guide
sdp-id — Displays only services bound to the specified SDP ID.
Values 1 — 17407
vc-id — The virtual circuit identifier.
Values
1 — 4294967295
far-end ip-address — Displays only services matching with the specified far-end IP address.
Default Services with any far-end IP address.
Show Service SDP Using X — The following table describes show service sdp-using output
fields.
Label
Svc ID
Sdp ID
Type
Far End
Oper State
Ingress Label
Egress Label
Sample Output
*A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId SdpId
-------------------------------------------------------------------------------
1 300:1
2 300:2
100 300:100
101 300:101
102 300:102
-------------------------------------------------------------------------------
Number of SDPs : 5
-------------------------------------------------------------------------------
*A:ALA-1#
service-using [epipe] [ies] [vpls] [vprn] [mirror] [apipe] [fpipe] [ipipe] [cpipe] [b-vpls] [i-
vpls] [m-vpls] [sdp sdp-id] [customer customer-id]
The service identifier.
The SDP identifier.
Type of SDP: spoke or mesh.
The far-end address of the SDP.
The operational state of the service.
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by this SDP.
Type Far End
Mesh 10.0.0.13
Spok 10.0.0.13
Mesh 10.0.0.13
Mesh 10.0.0.13
Mesh 10.0.0.13
Description
Opr State I.Label
Up 131071
Up 131070
Up 131069
Up 131068
Up 131067
E.Label
131071
131070
131069
131068
131067
Page 1913