Alcatel-Lucent 7750 SR Manual page 1678

Show, Clear, Debug Commands
port-db
Syntax port-db sap sap-id [detail]
port-db sap sap-id group grp-address
port-db sdp sdp-id:vc-id [detail]
port-db sdp sdp-id:vc-id group grp-address
Context show>service>id>igmp-snooping
Description
This command displays information on the IGMP snooping port database for the VPLS service.
Parameters
group grp-ip-address — Displays the IGMP snooping port database for a specific multicast group
sap sap-id — Displays the IGMP snooping port database for a specific SAP. See
sdp sdp-id — Displays only IGMP snooping entries associated with the specified mesh SDP or
vc-id — The virtual circuit ID on the SDP ID for which to display information.
group grp-address — Displays IGMP snooping statistics matching the specified group address.
source ip-address — Displays IGMP snooping statistics matching one particular source within the
Output Show Output — The following table describes the show output fields:
Page 1678
address.
Command Descriptions on page 1933
spoke SDP. For a spoke SDP, the VC ID must be specified, for a mesh SDP, the VC ID is
optional.
Values
1 — 17407
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
multicast group.
Label
Group Address
Mode
Type
for command syntax.
The IP multicast group address for which this entry contains infor-
mation.
Specifies the type of membership report(s) received on the interface
for the group.
In the include mode, reception of packets sent to the specified multi-
cast address is requested only from those IP source addresses listed
in the source-list parameter of the IGMP membership report.
In exclude' mode, reception of packets sent to the given multicast
address is requested from all IP source addresses except those listed
in the source-list parameter.
Indicates how this group entry was learned.
If this group entry was learned by IGMP, the value is set to dynamic.
For statically configured groups, the value is set to static.
Description
7750 SR OS Services Guide
Common CLI