How To Read This Design Guide; How To Read This Design Guide - Fc; Available Literature - Danfoss VLT AutomationDrive FC 300 Design Manual

How to Read this Design Gui...
1 1

1 How to Read this Design Guide

1.1 How to Read This Design Guide - FC 300

This contains information proprietary to Danfoss. By
accepting and using this manual, the reader agrees that
the information contained herein will be used solely for
operating units from Danfoss or equipment from other
vendors provided that such equipment is intended for
communication with Danfoss units over a serial communi-
cation link. This publication is protected under the
copyright laws of Denmark and most other countries.
Danfoss does not warrant that a software program
produced according to the guidelines provided in this
manual functions properly in every physical, hardware, or
software environment.
Although Danfoss has tested and reviewed the documen-
tation within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect
to this documentation, including its quality, performance,
or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect,
special, incidental, or consequential damages arising out of
the use, or the inability to use information contained in
this manual, even if advised of the possibility of such
damages. In particular, Danfoss is not responsible for any
costs, including but not limited to those incurred as a
result of lost profits or revenue, loss or damage of
equipment, loss of computer programs, loss of data, the
costs to substitute these, or any claims by third parties.
Danfoss reserves the right to revise this publication at any
time and to change its contents without prior notice or
any obligation to notify former or present users of such
revisions or changes.
8
®
VLT AutomationDrive FC 300 Design Guide 90-1200 kW
This Design Guide can be used for all FC 300 frequency
converters with software version 6.6x.
The software version number can be seen from 15-43 Software
Version.
Table 1.1 Software Version Label

1.2 Available Literature

•
•
•
•
•
Danfoss technical literature is available in print from local
Danfoss sales offices or online at:
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/VLT+Technical+Documentation.htm
MG34S202 - Rev. 2013-08-19
FC 300
Design Guide
Software version: 6.6x
The Operating Instructions are shipped with the
unit and include information on installation and
startup.
The Design Guide includes all technical
information about the frequency converter,
frames D, E, and F, and customer design and
applications.
The Programming Guide provides information on
how to programme and includes complete
parameter descriptions.
The Profibus Operating Instructions provides
information on how to control, monitor, and
programme the frequency converter via a
Profibus fieldbus.
The DeviceNet Operating Instructions provides
information on how to control, monitor, and
programme the frequency converter via a
DeviceNet fieldbus.