Danfoss VLT AutomationDrive FC 300 Design Manual page 185

Electrical Installation
Terminal Locations - Options Cabinet (F3 and F4)
Take the following position of the terminals into consideration when designing the cable access.
1
Illustration 7.29 Terminal Locations - Options Cabinet. Gland Plate is 42 mm below .0 Level.
1 Left Side
2 Front Side
Table 7.21 Legend to Illustration 7.29
®
VLT AutomationDrive FC 300 Design Guide 90-1200 kW
2
134.6[5.30]
0.0[0.00]
3 Right Side
4 Earth ground bar
MG34S202 - Rev. 2013-08-19
3
1031.4[40.61]
939.0[36.97]
4
0.0[1.75]
244.4[1.75]
244.4[9.62]
7 7
183