Danfoss VLT AutomationDrive FC 300 Design Manual page 147

Mechanical Installation
Terminal Locations - Inverter Frame Size F12 and F13
1
FASTENER TORQUE: MIO 19 Nm (14 FT -LB) FASTENER TORQUE: MIO 19 Nm (14 FT -LB)
U/T1 96 V/T2 97 W/T3 98 U/T1 96 V/T2 97 W/T3 98
Illustration 6.76 Terminal Locations - Inverter Cabinet. Gland Plate is 42 mm below .0 Level.
1 Front View
2 Left Side View
3 Right Side View
4 Brake Terminals
5 Earth/Ground Bar
Table 6.43 Legend to Illustration 6.69
®
VLT AutomationDrive FC 300 Design Guide 90-1200 kW
FASTENER TORQUE: MIO 19 Nm (14 FT -LB)
U/T1 96 V/T2 97 W/T3 98
6
MG34S202 - Rev. 2013-08-19
2
4
308.3 [12.14]
253.1 [9.96]
180.3 [7.10]
5
0.0 [0.00]
4
3
6 6
145