Danfoss VLT AutomationDrive FC 300 Design Manual page 62

Selection
FC 302
High/Normal load *
Typical shaft output at 400 V [kW]
Typical shaft output at 460 V [HP]
Typical shaft output at 500 V [kW]
Enclosure IP21, IP54 without/with
options cabinet
Output current
4 4
Continuous (at 400 V) [A]
Intermittent (60 s overload)
(at 400 V) [A]
Continuous (at 460/500 V) [A]
Intermittent (60 s overload)
(at 460/500 V) [A]
Continuous KVA (at 400 V) [KVA]
Continuous KVA (at 460 V) [KVA]
Continuous KVA (at 500 V) [KVA]
Maximum input current
Continuous (at 400 V) [A]
Continuous (at 460/500 V) [A]
Max. cable size, motor [mm
Max. cable size, mains [mm
Max. cable size, brake [mm
Max. external mains fuses [A]
Estimated power loss at 400 V [W]
Estimated power loss at 460 V [W]
F9/F11/F13 max. added losses A1 RFI,
CB or disconnect, & contactor
F9/F11/F13
Max. panel options losses
Weight,enclosure IP21, IP54 [kg]
Weight, rectifier module [kg]
Weight, inverter module [kg]
4)
Efficiency
Output frequency
Heatsink overtemp. trip
Power card ambient trip
* High overload=160% torque during 60 s, Normal overload=110% torque during 60 s.
Table 4.5 Technical Specifications, F10-F13 frames, 380-500 V Mains Supply 6x380-500 V AC, 12-Pulse
1) American Wire Gauge.
2) For fuse ratings, see 7.2.1 Fuses.
3) Typical power loss is at normal conditions and expected to be within
values are based on a typical motor efficiency (IE/IE3 border line). Lower efficiency motors add to the power loss in the frequency converter. If the
switching frequency is raised from nominal, the power losses rise significantly. LCP and typical control card power consumptions are included.
Options and customer load can add up to 30 W to the losses, though usually a fully loaded control card and options for slots A and B each add
only 4 W.
4) Measured using 5 m screened motor cables at rated load and rated frequency.
60
®
VLT AutomationDrive FC 300 Design Guide 90-1200 kW
P450
HO NO HO
450 500 500
600 650 650
530 560 560
F10/F11
800 880 880
1200 968 1320
730 780 780
1095 858 1170
554 610 610
582 621 621
632 675 675
779 857 857
711 759 759
2 1)
(AWG) ]
2 1)
(AWG) ]
2 (AWG) 1) ]
2)
3) 4) 9492 10647 10631
3) 4)
8730 9414 9398
893 963 951
102
102
MG34S202 - Rev. 2013-08-19
P500 P560
NO HO NO HO
560 560 630 630
750 750 900 900
630 630 710 710
F10/F11 F10/F11
990 990 1120 1120
1089 1485 1232 1680
890 890 1050 1050
979 1335 1155 1575
686 686 776 776
709 709 837 837
771 771 909 909
964 964 1090 1090
867 867 1022 1022
8x150 (8x300 mcm)
6x120 (6x250 mcm)
4x185 (4x350 mcm)
900
12338 11263 13201 13172 15436 14967 18084 16392 20358
11006 10063 12353 12332 14041 13819 17137 15577 17752
1054 978 1093 1092
400
1017/ 1319
102 102
102 102
0.98
0-590 Hz
95 °C
85 °C
± 15% (tolerance relates to variety in voltage and cable conditions.) These
P630 P710
NO HO NO HO
710 710 800 800
1000 1000 1200 1200
800 800 1000 1000
F10/F11 F12/F13
1260 1260 1460 1460
1386 1890 1606 2190
1160 1160 1380 1380
1276 1740 1518 2070
873 873 1012 1012
924 924 1100 1100
1005 1005 1195 1195
1227 1227 1422 1422
1129 1129 1344 1344
12x150 (12x300 mcm)
6x185 (6x350 mcm)
1500
1230 2067 2280 2236
1261/ 1562
102 136
136 102
P800
NO
1000
1350
1100
F12/F13
1720
1892
1530
1683
1192
1219
1325
1675
1490
2541
136
102