Subaru Legacy 2002 Service Manual page 355

CYLINDER HEAD ASSEMBLY
Mechanical
6) Install intake manifold. <Ref. to FU-18,
INSTALLATION, Intake Manifold.> or <Ref. to
FU(w/oOBD)-16, INSTALLATION, Intake Mani-
fold.>
7) Install camshaft sprocket. <Ref. to ME-55,
INSTALLATION, Camshaft Sprocket.>
8) Install timing belt assembly. <Ref. to ME-51,
INSTALLATION, Timing Belt Assembly.>
9) Install belt cover. <Ref. to ME-49,
INSTALLATION, Belt Cover.>
10) Install crankshaft pulley. <Ref. to ME-47,
INSTALLATION, Crankshaft Pulley.>
11) Install V-belt. <Ref. to ME-45, INSTALLATION,
V-belt.>
C: DISASSEMBLY
S173093A06
1) Place cylinder head on ST.
ST 498267800 CYLINDER HEAD TABLE
2) Set ST on valve spring. Compress valve spring
and remove the valve spring retainer key. Remove
each valve and valve spring.
ST 499718000 VALVE SPRING REMOVER
CAUTION:
¼ Mark each valve to prevent confusion.
¼ Use extreme care not to damage the lips of
the intake valve oil seals and exhaust valve oil
seals.
B2M2630A
ME-66