Subaru Legacy 2002 Service Manual page 432

Tightening torque:
First:
12 N·m (1.2 kgf-m, 8.7 ft-lb)
Second:
12 N·m (1.2 kgf-m, 8.7 ft-lb)
2) Install left-hand belt cover No. 2.
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
3) Install tensioner bracket.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
WATER PUMP
4) Install left-hand camshaft sprockets by using
ST.
ST 4992707100 CAMSHAFT SPROCKET
Tightening torque:
78 N·m (8.0 kgf-m, 57.9 ft-lb)
S2M0760A
5) Install belt idler No. 2.
Tightening torque:
39 N·m (4.0 kgf-m, 28.9 ft-lb)
B2M2040
6) Install automatic belt tension adjuster. <Ref. to
ME-51, AUTOMATIC BELT TENSION ADJUSTER
ASSEMBLY AND BELT IDLER, INSTALLATION,
Timing Belt Assembly.>
7) Install timing belt. <Ref. to ME-52, TIMING
BELT, INSTALLATION, Timing Belt Assembly.>
8) Install V-belts. <Ref. to ME-45, INSTALLATION,
V-belt.>
9) Install radiator main fan and sub fan motor
assemblies. <Ref. to CO-27, INSTALLATION,
Radiator Main Fan and Fan Motor.> and <Ref. to
CO-29, INSTALLATION, Radiator Sub Fan and
Fan Motor.>
H2M2380
CO-17
WRENCH
B2M2039A
S2M0024
Cooling