Subaru Legacy 2002 Service Manual page 456

Hide thumbs Also See for Legacy 2002:

Table of Contents

Engine oil amount for refill:

(4.2 US qt, 3.5 Imp qt)

The proper viscosity helps vehicle get good cold

and hot starting by reducing viscous friction and

thus increasing cranking speed.

When replenishing oil, it does not matter if the

oil to be added is a different brand from that in

the engine; however, use oil having the API

classification and SAE viscosity No. desig-

nated by SUBARU.

If vehicle is used in desert areas with very high

temperatures or for other heavy duty applications,

the following viscosity oils may be used: API clas-

sification: SL or SJ

SAE Viscosity No.: 30, 40, 10W-50, 20W-40, 20W-

6) Close engine oil filler cap.

7) Start engine and warm it up for a time.

8) After engine stops, recheck the oil level. If

necessary, add engine oil up to upper level on level

Chapters

Table of Contents