Subaru Legacy 2002 Service Manual page 490

Hide thumbs Also See for Legacy 2002:

Table of Contents

B: COMPONENT

(1) Spark plug

(2) Spark plug cord (#1, #3)

(3) Ignition coil and ignitor ASSY

¼ Wear working clothing, including a cap, protec-

tive goggles, and protective shoes during opera-

¼ Remove contamination including dirt and corro-

sion before removal, installation or disassembly.

¼ Keep the disassembled parts in order and pro-

tect them from dust or dirt.

¼ Before removal, installation or disassembly, be

sure to clarify the failure. Avoid unnecessary

GENERAL DESCRIPTION

(4) Spark plug cord (#2, #4)

IG(w/oOBD)-3

Tightening torque: N·m (kgf-m, ft-lb)

removal, installation, disassembly, and replace-

¼ Be careful not to burn your hands, because each

part on the vehicle is hot after running.

¼ Be sure to tighten fasteners including bolts and

nuts to the specified torque.

¼ Place shop jacks or safety stands at the speci-

fied points.

¼ Before disconnecting electrical connectors of

sensors or units, be sure to disconnect ground

cable from battery.

21 (2.1, 15)

6.4 (0.65, 4.7)

Chapters

Table of Contents