Subaru Legacy 2002 Service Manual page 484

Hide thumbs Also See for Legacy 2002:

Table of Contents

3. Ignition Coil and Ignitor

1) Disconnect battery ground cable.

2) Disconnect spark plug cords from ignition coil

and ignitor assembly.

3) Disconnect connector from ignition coil and

ignitor assembly.

IGNITION COIL AND IGNITOR ASSEMBLY

4) Remove ignition coil and ignitor assembly.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

6.4 N·m (0.65 kgf-m, 4.7 ft-lb)

Be sure to connect wires to their proper posi-

tions. Failure to do so will damage unit.

Chapters

Table of Contents