(1) Service hole plug
(2) Gasket
27) Remove service hole cover and service hole
plugs using hexagon wrench [14 mm (0.55 in)].
CYLINDER BLOCK
(3) Circlip
(4) Piston pin
28) Rotate crankshaft to bring #1 and #2 pistons
to bottom dead center position, then remove piston
circlip through service hole of #1 and #2 cylinders.
B2M2620
ME-75
Mechanical
(5) Service hole cover
(6) O-ring
G2M0165
S2M1590B