Subaru Legacy 2002 Service Manual page 374

CYLINDER BLOCK
Mechanical
CAUTION:
Ensure that the total "re-tightening angle" [in
the former two steps], do not exceed 180°.
B2M2628B
28) Install oil level gauge guide and tighten attach-
ing bolt (left side only).
29) Install rocker cover.
30) Install crankshaft sprocket. <Ref. to ME-57,
INSTALLATION, Crankshaft Sprocket.>
31) Install camshaft sprocket. <Ref. to ME-55,
INSTALLATION, Camshaft Sprocket.>
32) Install timing belt assembly. <Ref. to ME-51,
INSTALLATION, Timing Belt Assembly.>
33) Install belt cover. <Ref. to ME-49,
INSTALLATION, Belt Cover.>
34) Install crankshaft pulley. <Ref. to ME-47,
INSTALLATION, Crankshaft pulley.>
35) Install generator and A/C compressor brackets
on cylinder head.
36) Install V-belt. <Ref. to ME-45, INSTALLATION,
V-belt.>
37) Install intake manifold. <Ref. to FU-18,
INSTALLATION, Intake Manifold.> or <Ref. to
FU(w/oOBD)-16, INSTALLATION, Intake Mani-
fold.>
ME-85