Camshaft - Subaru Legacy 2002 Service Manual

Mechanical

19. Camshaft

S173092
A: REMOVAL
S173092A18
1) Remove V-belt. <Ref. to ME-45, REMOVAL,
V-belt.>
2) Remove crankshaft pulley. <Ref. to ME-47,
REMOVAL, Crankshaft Pulley.>
3) Remove belt cover.
REMOVAL, Belt Cover.>
4) Remove timing belt assembly. <Ref. to ME-50,
REMOVAL, Timing Belt Assembly.>
5) Remove camshaft sprocket. <Ref. to ME-55,
REMOVAL, Camshaft Sprocket.>
6) Remove crankshaft sprocket. <Ref. to ME-57,
REMOVAL, Crankshaft Sprocket.>
7) Remove belt cover No. 2 (LH).
8) Remove belt cover No. 2 (RH).
CAUTION:
Do not damage or lose the seal rubber when
removing belt covers.
9) Remove tensioner bracket.
10) Remove camshaft position sensor support.
(LH side only)
11) Remove oil level gauge guide. (LH side only)
12) Remove valve rocker assembly. <Ref. to
ME-58, REMOVAL, Valve Rocker Assembly.>
13) Remove camshaft cap.
CAMSHAFT
<Ref. to ME-49,
B2M2601
H2M2380
ME-60
(1) Remove bolts (a) through (b) in alphabetical
sequence.
(2) Equally loosen bolts (c) through (j) all the
way in alphabetical sequence.
(3) Remove bolts (k) through (p) in alphabetical
sequence using ST.
ST 499497000 TORX PLUS
(4) Remove camshaft cap.
14) Remove camshaft.
15) Remove oil seal.
B2M2612B
B2M2612C
B2M2612D
B2M2613