Subaru Legacy 2002 Service Manual page 471

Speed Control Systems
2. Accelerator Pedal
A: REMOVAL
S177005A18
1) Disconnect ground cable from battery.
2) Remove lock nut from accelerator cable
bracket.
3) Separate accelerator cable from bracket.
4) Remove accelerator cable end from throttle
cam.
5) Disconnect accelerator cable from throttle body.
CAUTION:
Be careful not to kink accelerator cable.
(A) Lock nut
(B) Accelerator cable bracket
(C) Accelerator cable
(D) Throttle cam
ACCELERATOR PEDAL
6) Remove clip inside engine compartment.
S177005
¼ LHD model
¼ RHD model
B4M2316A
7) Remove instrument panel lower cover from
instrument panel, and connector.
8) Disconnect connector from kick-down switch.
(AT model)
9) Remove brake and clutch pedal bracket. (LHD
MT model) <Ref. to BR-51, REMOVAL, Brake
Pedal.>
SP-4
(A) Toe board
(B) Accelerator cable
(C) To accelerator pedal
(D) Brake booster
(E) Clip
B2M4143A
B4M1756C