Subaru Legacy 2002 Service Manual page 400

Hide thumbs Also See for Legacy 2002:

Table of Contents

4. Rear Exhaust Pipe

1) Separate rear exhaust pipe from center

exhaust pipe.

Be careful, exhaust pipe is hot.

2) Separate rear exhaust pipe from muffler.

Be careful not to pull down rear exhaust pipe.

3) Remove rear exhaust pipe.

B: INSTALLATION

Replace gaskets with new ones.

1) Install rear exhaust pipe to muffler.

Tightening torque:

48 N·m (4.9 kgf-m, 35.4 ft-lb)

REAR EXHAUST PIPE

2) Install rear exhaust pipe to center exhaust pipe.

Tightening torque:

18 N·m (1.8 kgf-m, 13.0 ft-lb)

C: INSPECTION

1) Make sure there are no exhaust leaks from con-

nections and welds.

2) Make sure there are no holes or rusting.

Chapters

Table of Contents