GRAPHTEC midi LOGGER GL240 User Manual page 5

Do not use or store the GL240 in a location exposed to
direct sunlight or the direct draft of an air conditioner
or heater.
•
Such location may impair the
GL240's performance.
Use prohibited
Do not use the GL240 in a location subject to
excessive mechanical vibration or electrical noise.
•
Such location may impair the GL240's performance.
Use prohibited
If fluid or foreign matters enters inside the GL240, turn
off the power switch and disconnect the power cord
from the electrical socket.
•
Use in such status may cause a fire hazard due to electrical
shock or current leakage.
•
Contact your sales representative or
nearest Graphtec vendor to request
repair.
Unplug the power
cord from the socket
Do not attempt to lubricate the GL240's mechanisms.
•
Such action may cause the GL240 to break down.
Use prohibited
Be sure to use the Graphtec-supplied AC adapter.
•
It will damage this device.
Use prohibited
Safety Precautions
CAUTION
Do not place the receptacles containing fluid onto this
device or close to this device.
•
To insert or disconnect the power cord or a signal
input cable, grasp the power cord's plug or the signal
input cable's connector.
•
Do not use the AC power supply and the DC power
supply other than the specified supply voltage for this
device.
•
Never clean the GL240 using a volatile solvent (such
as thinner or benzine).
•
•
Fluid spilling inside the GL240 may cause a fire hazard due
to electrical shock or current leakage.
Watch out for
Avoid water
electrical shock
Pulling the cord/cable itself damages the cord/cable,
resulting in a fire hazard or electrical shock.
Use prohibited
Such action may cause a fire hazard due to electric shock
or current leakage.
Use prohibited
Such action may impair the GL240's performance.
Clean off any soiled areas using a soft dry cloth.
Use prohibited
Safety Precautions
iii