GRAPHTEC midi LOGGER GL240 User Manual page 46

CHAPTER 3 Settings and Measurement
6. Device access display (SD memory card 2 / wireless LAN display)
: The SD memory card is not inserted into the SD CARD (SD2) slot.
: The SD memory card is inserted into the SD CARD (SD2) slot, but it is not accessed.
*
: The SD memory card in the SD CARD (SD2) slot is accessed. Do not remove the SD
: Displayed when connecting to the wireless LAN.
Please do not turn off the power when the " * " status icon is displayed or the device is being accessed.
The data that has been captured or is being captured is may be damaged.
Please start the operation after making sure that it is not being accessed on the display.
7. Remote lamp
: Indicates local mode. Operations can be conducted on the GL240.
: Indicates remote mode. With some exceptions, operations must be conducted on a PC.
8. Key lock display
: Not in key lock status. Normal operations are enabled.
: Key lock status. All the keys are locked.
9. Clock display
Displays the current date and time.
Refer to "(6) OTHER settings" in "3.4 Setting Menus" for details on date and time settings.
3-4
memory card.
During accessing to the SD memory card, the POWER LED blinks.
When you cancel the connection on the application (GL100_240_840-APS), the GL240 is
automatically sent back to local mode. If local mode is not entered, press the [QUIT] key.
Refer to "(13) To cancel key lock by password" in "3.4 Setting Menus" for details on the key
lock.