GRAPHTEC midi LOGGER GL240 User Manual page 54

CHAPTER 3 Settings and Measurement
(9) DISPLAY
<Data replay during capture>
< Replay screen display>
For CSV-formatted data, only the data captured by this GL240 can be replayed.
Also, when the data captured in CSV format is replayed, the unit of the temperature data is displayed in "deg
C" rather than "°C".
Only when the integrated CH is included in the data, the integrated bar graph can be displayed. For details,
please refer to "(11) Integrated bar graph display" in "3.4 Setting Menus".
3-12
This key is used to switch the screen mode.
You can switch the window mode during Free Running (when capturing is
stopped) and Capturing.
Pressing this key switches the screen display as follows:
<Waveform + Digital Screen>
Displays the waveform and the digital values (when MONITOR
is set.).
The setting can be changed using the [SPAN/POSI/TRACE]
key.
<Expanded Waveform screen>
Displays only the waveform expanded in full screen mode.
<Digital + Calculation Display screen>
Displays digital values and two calculation results in large
letters.
The calculation settings can be made using the Data menu.
Refer to "(2) DATA setting" in "3.4 Setting Menus".
Use the
mode. The calculation results are displayed only when switched
to "All Mode".
Refer to "(7) FAST FORWARD key (KEY LOCK)" in "3.2 Key
Operation" for details on " All Mode".
<2-screen replay display>
FAST FORWARD keys to change the display
<Integrated bar graph display>