Text Input - GRAPHTEC midi LOGGER GL240 User Manual

(9) Text input

Related to text input operations such as annotation, EU (scaling) unit and captured data file name input.
<New folder creation>
Operation mode
(1) Text input A
a
0
+
OK
(2) When
selecting
operation
<Setting example>
Example of operation procedure to enter the "TEST01" to create the new file name is described.
<Keys to be used >
• (1) Set the operation mode to "A" (Uppercase alphabet mode).
• (2) Select the [TEST] in the Character input.
• (1) Set the operation mode to "0" (Numeric mode).
• (2) Select the "01" in the character input.
If you make a mistake to enter the character, move the cursor on the character you want to delete with
Fast forward key and (1) place in the position of the
[ENTER] key to delete the one character.
• After completing character input, confirm by setting operation selection to [OK] and then pressing the
[ENTER] key.
* When setting the display language to language other than Japanese, Half-width Kana mode cannot be
used in "(1) Operation selection".
(1)
(2)
Description
Upper case alphabet mode
Lower case alphabet mode
Numeric mode
Symbol mode
Delete mode
Insert mode
Finalize mode
Text used for each operation
CHAPTER 3 Settings and Measurement
Operation method
When the cursor key is moved to the uppermost part,
operation can be selected using the left/right key (
After selecting an operation, use the down key ( ) to move
the cursor to the desired character.
Use the Fast forward left and right (
cursor on the selected characters.
When you bring the cursor to a character and press [ENTER]
key, the character is entered. After you finish entering
characters, move the cursor to OK and then press [ENTER]
key.
(1) Character input field (using the [ENTER] key)
(2) Select character type, delete, insert, confirm
(3) Character selection
in the operation mode and then press the
).
) keys to move the
3-79