GRAPHTEC midi LOGGER GL240 User Manual page 108

CHAPTER 3 Settings and Measurement
FTP server setting
This is used to perform the FTP server setting of backup destination.
Selection item
FTP Client FTP Server
User Name
Password
Port Number
PASV Mode
FTP Server
Connection Test
FTP server Port number
E-mail setting
Perform the settings to send the e-mail from the GL240.
The e-mail with the notification setting information (Alarm, Low Battery, Low communication strength, Free
space in the internal memory (SD1) or SD memory card (SD2) (only when data capturing) is sent. In addition,
when setting to the Periodic notification, the e-mail will be sent in the set time.
<E-mail send setting>
E-mail send setting
<E-mail account setting>
E-mail account
setting
3-66
Enter the domain name or IP address of the FTP server. (Up to 127 characters)
Enter the user name of the FTP account. (Up to 31 characters)
Enter the password of the FTP account. (Up to 31 characters)
Enter the port number of a port to be used for FTP. It is normally 21. (0 to 65535)
Make the passive mode setting.
ON : Should be set for communication with an external FTP server in a firewall environment.
OFF : Should be set for communication with an FTP server in a normal network environment.
Press right key to execute (Performs connection test to the FTP server.)
When the connection test is performed, a message is displayed.If connection cannot be
established, check the settings and perform the connection test again.
* If the connection test is passed, the message is displayed.
Enter the port number used for the FTP server in the GL240. Usually, this number is 21.
(0 to 65535)
Selection item
E-mail TO
address
CC1 to CC3
setting
Subject
Notification Alarm
setting
Low battery
Low
communication
strength
Free space in SD
memory card
Periodic
notification
Selection item
User name
Password
E-mail address
Description
Description
Set the e-mail address of the e-mail destination. (Up to 63 characters)
Up to three e-mail addresses can be set as CC (carbon copy). (Up to
63 characters)
The e-mail subject can be registered in the character string entering.
(Up to 63 characters)
When it is set to On, the occurrence of alarm is notified.
When it is set to On, the low battery information is notified.
When it is set to On, the low communication strength information is
notified.
When setting to On, free space information of the capturing
destination memory is notified.
Set the time to send the notification setting information with the
e-mail to any address.
Description
Set the e-mail account. (Up to 63 characters)
Set the e-mail password. (Up to 31 characters)
Set the e-mail address of the destination. (Up to 63 characters)