GRAPHTEC midi LOGGER GL240 User Manual page 59

(1) Free Running
The scale of the selected
channel is indicated.
In free-running, you primarily perform the settings for data capture.
You can check the currently input signal in the waveform or digital value.
The information in the screen display is changed by switching the channel.
The operation of screen display can be performed during free-running, capturing, and replaying.
Main operations available during Free Running
Measuement parameters settings
SPAN/POSITION/TRACE
Display mode
File operations
Data replay
Time axis change
(2) Capturing
The remaining capacity of memory
Time of Capturing
Capture destination and file name
The captured data is saved in the internal memory (SD1) or SD memory card (SD2) during data capture.
You cannot use the [MENU] key to change the setting.
Operations available during capture
SPAN/POSITION/TRACE change
Screen display mode switch
Replay while capturing
Save to device
Setting check
Time axis change
The selected channel is displayed without coloration.
(Remaining time more than 99999 hours is
displayed as "++++:++:++".)
The selected channel is enlarged.
The display channel can be
switched by operating the
The [MENU] key is used to change various setting items in configuration
menus.
The [SPAN/POSI/TRACE] key is used to change settings.
The [DISPLAY] key is used to change the display mode.
The [FILE/GROUP] key is used to perform file-related operations.
The [REVIEW] key is used to replay the captured data.
The [TIME/DIV] key is used to change the time axis scale..
Change the settings with the [SPAN/POSI/TRACE] key.
Used to change the screen mode with the [DISPLAY] key.
The [REVIEW] key is used to replay captured data in two windows at the
same time.
While data is replayed in two windows, the [FILE/GROUP] key is used to
save data to a device.
Display the setting information with the [MENU] key.
Change the time axis with the [TIME/DIV] key.
CHAPTER 3 Settings and Measurement
keys.
3-17