GRAPHTEC midi LOGGER GL240 User Manual page 115

Move the cursor to the file or folder you want to delete and then press the [ENTER] key. The " " mark is
displayed in the checkbox. (Multiple files/folders can be selected)
Press the [ENTER] key again to cancel it.
When it is cancelled, the " " mark will disappear.
The selection is completed by pressing the [QUIT] key.
(2) Enable the deletion.
The message of "Delete the file. All the data will be lost. Are you sure?" is displayed.
Operate the [ENTER] key again to delete the selected data.
(7)-2 Data Save
During replaying the data, the displayed data can be saved in the internal memory (SD1) or SD memory card
(SD2) by selecting the Data Save in the File Menu.
<If the naming method is Auto>
Setting
(1) File Type
(2) Naming method
(3) Folder
(4) Save range
(5) File
<If the naming method is Arbitrary>
(1)
(2)
(3)
(4)
Sets the file format used to save data.
GBD: Creating a data file in Graphtec's proprietary binary format.
* Data tampering can be prevented.
CSV: Creating a data file in text format.
Sets how a data file should be named.
Auto : Automatically supplies the file name.
Example : 20150201-123456.GBD
Number part : File creation date
* The file is created on February 2, 2015, 12:34:56 in this example.
GBD : Data format
GBD (Binary data)
CSV (Text format)
Arbitrary : Data is captured to a file with an entered file name.
Sequential number : A file is created with an arbitrary file name that has been entered,
followed by a sequential number.
Specify a folder to which you want to capture (or save) data. For details, refer to "(8) File
box".
Set the data range to be saved.
All data : All of the data is saved regardless of the cursor operation.
Data between cursors : Only the data in the range between cursors A and B is saved.
Specify a folder to which you want to capture (or save) data. For details, refer to "(8) File
box".
CHAPTER 3 Settings and Measurement
(1)
(2)
(3)
(5)
(4)
Description
3-73