Data Settings - GRAPHTEC midi LOGGER GL240 User Manual

(2) DATA settings

This is used to specify capture-related items and calculations.
Setting
Sampling
Capture destination
File Name
Ring/Relay capture
Ring capture
AC Line Filter
Backup Backup Interval
Backup Destination SD1 (Internal memory), SD2 (SD memory card), FTP
Save Folder
Calc. Settings 1
Calc. Settings 2
Captured data file name
Setting
Folder (File)
Name Type
File Type
(2)-1 Sampling interval
This is used to set the sampling interval for data capture.
The table below shows the number of measuring channels*
If data fluctuate due to noise, set the sampling interval to a value which enables the digital filter function.
Number of Measuring
Channels*
1
1CH
2CH
3CH to 5CH
6CH to 10CH
*1: "Number of Measuring Channels" is the number of channels in which input settings are NOT set to "OFF".
(CHs in sensor and wireless sensor connected through the wireless unit are not included.)
*2: When the temperature setting is performed in 10, 20, or 50 ms sampling interval, the data capture cannot be performed.
When using the digital filter, the AC power frequency to be used must be set accurately. Please perform
the setting accurately in reference to "(6)-8 AC Line Frequency".
10, 20, 50, 100, 125, 200, 250, 500ms, 1, 2, 5, 10, 20, 30s, 1, 2, 5, 10, 20, 30min,
1h; External
* Available sampling intervals vary depending on the input settings and the number of
channels to be used.
* Refer to "(2)-1 Sampling Interval" for details.
SD1 (Internal memory), SD2 (SD memory card)
* See the description of a captured data file name given below.
Off, Ring, Relay
Number of recording points
Off, On
Off, 1, 2, 6, 12, 24 hours
Folder name
Off, Average, Max, Min, Peak, RMS
Off, Average, Max, Min, Peak, RMS
Capture destination : SD1 (Internal memory), SD2 (SD memory card)
Folder : Text input (if the naming method is Auto)
File : Text input (if the naming method is Arbitrary or Sequential number)
Auto, Arbitrary, Sequential number
Binary (GBD), Text (CSV)
Allowed Sampling Interval
10ms or slower *
20ms or slower *
50ms or slower *
100ms or slower
CHAPTER 3 Settings and Measurement
Selections available
Selections available
and sampling interval values that can be set.
1
Sampling Interval which enables
2
2
2
Digital Filter
50ms or slower
125ms or slower
250ms or slower
500ms or slower
3-43