GRAPHTEC midi LOGGER GL240 User Manual page 84

CHAPTER 3 Settings and Measurement
Branch adapter for GS of the wireless sensor setting: optional
(GL100-WL+GS-DPA)
When the wireless sensor and the branch adapter for GS are used, the composite measurements with
combination of three ways can be performed.
Temperature and humidity sensor (GS-TH)
Temperature and humidity sensor (GS-TH)
CO2 sensor (GS-CO2)
As an example, the setting screen of temperature or humidity sensor (GS-TH) and illumination / ultraviolet
sensor (GS-LXUV) is displayed.
When the temperature and humidity sensor (GS-TH) or illumination / ultraviolet sensor (GS-LXUV) are
connected to the wireless sensor and the branch adapter for GS, the setting screen is displayed.
(1)-46 Input setting
This is used to select the input conditions.
When the two types of sensors are connected, the information that can be input to the 1ch to 4ch and 5ch to
8ch is displayed.
In the case of this example, 1ch to 4ch correspond to the temperature and humidity sensor, and 5ch to 8ch
correspond to the illumination / ultraviolet sensor.
Setting
Off
1ch TEMP
2ch RH
3ch DEW
4ch ACC. TEMP
5ch ILLUM
6ch UV
7ch ACC. ILLUM
8ch ACC. UV
The following shows the CH allocation when connecting a plurality of sensors.
For the setting for each sensor, refer to "Option setting (wireless sensor ****) described above.
* The ***** symbols indicate the abbreviation of name (model).
Temperature and humidity sensor (GS-TH) + Illumination / ultraviolet
sensor (GS-LXUV)
Temperature and humidity sensor (GS-TH) + CO2 sensor (GS-CO2)
CO2 sensor (GS-CO2) + Illumination / ultraviolet sensor (GS-LXUV)
3-42
Combined GS sensor list
Illumination / ultraviolet sensor (GS-LXUV)
CO2 sensor (GS-CO2)
Illumination / ultraviolet sensor (GS-LXUV)
The input signal is not measured. The waveform and digital display also are not performed.
Used to measure the temperature.
Used to measure the humidity.
Used to measure the dew-point temperature.
Used to measure the accumulated temperature.
Used to measure the illuminance.
Used to measure the ultraviolet.
Used to measure the accumulated illuminance.
Used to measure the accumulated ultraviolet.
Combination
Description
CH1 to 4
TH (GS-TH)
TH (GS-TH)
LXUV (GS-LXUV)
CH5 to 8
LXUV (GS-LXUV)
CO2 (GS-CO2)
CO2 (GS-CO2)