Quick Setting - GRAPHTEC midi LOGGER GL240 User Manual

(12) Quick setting

<Free Running>
Screen Operation mode
Waveform Free Running
Capturing
Replaying during
capture
Replaying
(12)-1 SAMPLE
Set the sampling interval of the measurement data before free Running or capturing.
For the sampling interval, refert o "(2)1 Smapling interval" described above.
(12)-2 ZONE
The waveform display can be switched to 1, 2, 5 or 10-divided display.
1-divided: 10ch full scale display
2-divided: The display is divided into two screens. 1, 3, 5, 7, 9-ch and 2, 4, 6, 8, 10-ch are displayed in
the 2-divided screens separately.
5-divided: The display is divided into five screens. 1/6ch, 2/7ch, 3/8ch, 4/9ch, 5/10ch are displayed in the
5-divided screens separately.
10-divided: The display is divided into ten screens. 1-10ch is displayed in a single screen separately.
(12)-3 SEARCH
Search the alarm generated position in the replayed data.
<Replay data>
(11)-1
(11)-2
Sign
SAMPLE Using the
ZONE Using the
ZONE Using the
ZONE Using the
SEARCH Using the
: Search the past waveform.
: Search the future waveform.
ZONE Using the
CHAPTER 3 Settings and Measurement
Description
key, change the sampling interval.
key, change the zone division.
key, change the zone division.
key, change the zone division.
key, perform the search.
key, change the zone division..
(11)-3
3-87