GRAPHTEC midi LOGGER GL240 User Manual page 87

(2)-3 Ring capture setting
•
Ring Capture Function
Setting
(1) Ring Capture
(2) Number of Ring Capture
Points
(3) Ring Capture Time
Start capturing data
Captured data is saved into the File 1.
File1
When capturing is stopped at the STOP point in the above, the File4 and the File 5 are remained.
These files are consolidated into one file and it is saved. Then the ring catpuer is completed.
File4
•
Twice as many files as the Number of Ring Capture Points will be created at the maximum.
•
If ring capture is On, the backup function is not available.
(1)
(2)
(3)
Set the capture function.
Off: The capture function is disabled.
Ring: Perform the ring recording. (For details, refer to the following figure.)
Relay: The data is continuously saved in 2GB-separated files without missing data.
To use the ring recording function, specify the number of data points per one file.
(For details, refer to the following figure.)
Display the measurement time that can be recorded in one file when the ring recording
function is enabled (On).
When the specified number of data are saved into the File 1, the captured data is saved into the File 2.
The number of data is specified in the "Ring Capture Points" menu.
When the specified number of data are saved into the File 2,
the captured data is saved into the File 3.
File 1 is deleted at this point.
When the specified number of data are saved into the File 3,
the captured data is saved into the File 4.
File 2 is deleted at this point.
File2 File3 File4
File5
CHAPTER 3 Settings and Measurement
Description
When the specified number of data are saved into the File 4,
the captured data is saved into the File 5.
File 3 is deleted at this point.
* Repeat this action.
Stop capturing data
File5
Filexx••• : Saved
3-45