Lan Setting - GRAPHTEC midi LOGGER GL240 User Manual

CHAPTER 3 Settings and Measurement

(5) LAN setting

Perform the I/F wireless LAN unit setting and the wireless sensor registration.
* When optional wireless LAN is not installed in the GL240, this screen is not displayed.
<Station settings>
Wireless LAN
Station setting
Other setting
(When the station
is set)
Access point
setting
Reflection of
setting
(When the Access
point is set)
3-56
Setting
SSID input
SSID search
Automatic WPS system
setting (WPS)
WPS execute
Encryption method
11n
Reflection of setting
Connect / disconnect
ST-IP setting IP address automatic acquisition Not used or used
IP address
Subnet mask
Port number
Gateway
DNS address
Server setting
Reflection of setting
SSID input
Automatic WPS system
setting (WPS)
WPS execute
Encryption method
Channel
Stealth
11n
Reflection of setting
AP-IP setting IP address
Subnet mask
Port number
Server setting
Reflection of setting
Wireless Connection
sensor setting
Module name
Search
AMP1
AMP2
<Access point settings>
Selections available
Off, station, access point
Character string input
Press right key to execute
Push button method / PIN method
Press right key to execute
None, WEP, WPA-PSK/WPA2-PSK
Off, On
Press right key to execute
Press right key to execute
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
1024 to 65535
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
Perform each server setting.
For details, refer to "(5)-6 Server setting".
Press right key to execute
Character string input
Push button method / PIN method
Press right key to execute
None, WEP, WPA-PSK/WPA2-PSK
1ch to 13ch
Off, On
Off, On
Press right key to execute
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
1024 to 65535
Perform each server setting.
For details, refer to "(5)-6 Server setting".
Press right key to execute
Off, On
Character string input
Press right key to execute
Display the set sensor.
Display the set sensor.