GRAPHTEC midi LOGGER GL240 User Manual page 109

<Outgoing mail server settings>
Selection item
Outgoing mail server Sending (SMTP) server name
settings
SMTP port number
Time zone
SMTP setting SMTP setting
<Incoming mail server settings>
Selection item
Incoming mail server Receiving (POP3) server name
settings
POP3 port number
Time zone
POP3 setting
When the mail is received, the mail is deleted from the mail server.
In order not to delete important mails, please use a dedicated e-mail account (e-mail address).
WAB server setting
Perform the WEB server settings.
Selection item
WEB server WAB number
Set the e-mail destination server name. (Up to 63 characters)
Set the SMTP port number to from 0 to 65535.
Set the time zone for the region to be used in the GL240.
Set the SMTP authentication method from Off, POP before SMTP, or
method SMTP-AUTH.
SMTP-AUTH Set the SMTP-AUTH authentication method from Off, PLAIN, LOGIN,
or CRAM-MD5.
Same as the Set the SMTP authentication information to the same settings as
POP3 POP3.
SMTP user name Set the user name for the SMTP authentication. (Up to 63 characters)
SMTP password Set the password for the SMTP authentication. (Up to 31 characters)
SMTP encryption Set the SMTP encryption from Off, StartTLS, and Over SSL.
E-mail sending Run the e-mail sending test.
test
Set the e-mail receiving server name. (Up to 31 characters)
Set the POP3 port number from 0 to 65535.
Set the time zone for the region to be used in the GL240.
Inquiry interval Set the e-mail receiving interval in the range of 1 to 1440 [min.].
Inquiry after Set whether or not to perform temporarily the e-mail receiving per 1
sending e-mail minute after sending e-mail.
POP3 encryption Set the POP3 encryption from Off, StartTLS, or Over SSL.
Immediately The e-mail is received immediately.
receiving
Enter the port number used for the WEB. Usually, this number is 80. (0 to 65535)
CHAPTER 3 Settings and Measurement
Description
Description
Description
3-67