Data Replay Menu - GRAPHTEC midi LOGGER GL240 User Manual

CHAPTER 3 Settings and Measurement

(10) Data replay menu

Select the data you want to replay from the "Data replay source" by pressing the [REVIEW] key and replay
the captured data.
<Select replay data source>
Select items
File
Checksum verification
For CSV-formatted data, only the data captured by this GL240 can be replayed.
"Checksum verification" is displayed only when selecting a GBD file to which a checksum is attached. For
details on how to add a checksum, refer to "3.4 Setting menu description" - "(6) - 9 Add checksum to file".
<When using the replay data and cursor A>
Cursor A
Data replay menus are displayed by pressing the [MENU] key during replay.
Cursor
Position
3-80
Specify the file in the capture destination (save destination).
Veifying checksum
The checksum confirmation result is displayed in the dialog.
When checksums match: "Checksum matched"
In case of checksum mismatch: "Checksum mismatched"
Setting
Move to First Data
Move to Last Data
Move to Center
Move to Method:
Selected Position
[Position]
[Time]
Cursor Synch
Description
<When using the replay data and cursor B>
Cursor B
Press right key to execute.
Press right key to execute.
Press right key to execute.
Position, Time
Position 0 to end of data
For example, if the sampling interval is 100 ms, capture
destination is the built-in RAM, and the number of capture
points is 10000, settings up to 999.9ms are available.
Date Date from the start to end of the data
Time Time from the start to end of the data
Off, On
Selections available