GRAPHTEC midi LOGGER GL240 User Manual page 99

•
Access point (operating as base unit)
This is used to set when connecting between the GL240 and sold separately Petit LOGGER GL100-WL (1
unit) through the wireless LAN.
•
Station (operating as child unit)
This is used to set the control from the PC and the data transfer to the PC when the sold separately
wireless LAN base unit is connected.
(5)-1 Wireless LAN setting
This is used to set the conditions when connecting the GL240 to wireless LAN.
(1) Perform the wireless LAN settings.
Selection item
Off
Station
Access point
(2) Restart the wireless LAN.
When restarting after selecting the wireless LAN, the information of the station or the access point is
displayed.
It takes some time to display.
After executing "Wireless LAN restart" once, the wireless LAN cannot selected. When the wireless LAN
selection is changed, the restart is enabled.
"Disconnect" "Wireless LAN restarting"
The wireless LAN is not used.
The GL240 is set to the child unit
The GL240 is set to the base unit.
"TCP-IP restarting" are executed.
CHAPTER 3 Settings and Measurement
Description
3-57