Setting Menus - GRAPHTEC midi LOGGER HV User Manual

CHAPTER 3 Settings and Measurement

3 .5 Setting Menus

When you press the [MENU] key during Free Running, the following menu screens appear.
AMP
(1) AMP settings
This menu is used to specify input signal-related settings.
< Analog settings >
Input
Range
Filter
EU
(Scaling settings)
Misc.
3-56
DATA
Setting
[Voltage]
[RMS]
[Temperature]
[Humidity]
Function
Dec pt
Meas. Upper limit
Value
Lower limit
EU value Upper limit
Lower limit
Select
Unit
Annotation text string
Inter- Function
CH Op
Operation Left-hand
Settings
side
Operator
Righthand
side
Scaling
Operations Dec pt
span
Upper limit Set numeric value.
Lower limit Set numeric value.
Select
Unit
Span Upper limit
settings
Lower limit
Set waveform color
Line Thickness Setting
Trace
DISP TRIG
Off, DC, RMS, TEMP, RH
20, 50, 100, 200, 500mV; 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000V; 1-5V
10, 25, 50, 100, 250, 500mVrms
1, 2.5, 5, 10, 25, 50, 100, 250, 500, 1000Vrms
TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S, TC-N, TC-W
100% fixed
Line, 5, 50, 500Hz, 5k, 50kHz
Off, On
None, 1 digit, 2 digits, 3 digits, 4 digits after the decimal point
Set numeric value.
Set numeric value.
Set numeric value.
Set numeric value.
Cur, Length, Area, Volume, Velocity, Accel, Freq, Mass, Energy,
Pressure, Flow, Temp, Strain, Brightness, Concentration; Optional
The selections vary depending on the unit selected in the above.
(Enter arbitrary text: Up to 8 characters)
Enter text. (Max. 31 characters)
Off, On
CH number
+, -, ×, /
CH number
/1000000, /1000, ×1, ×1000, ×1000000
×1, ×10, ×100, ×1000, ×10000
Cur, Length, Area, Volume, Velocity, Accel, Freq, Mass, Energy,
Pressure, Flow, Temp, Strain, Brightness, Concentration; Optional
The selections vary depending on the unit selected in the above.
(Enter arbitrary text: Up to 8 characters)
Set numeric value.
Set numeric value.
0 to 31 for each of red, green, blue (RGB)
1 to 8 dots
Off, On
I/F
Selections available
OTHER