MIL-C-5015 spec connectors
Crown Connector Inc's recommendation is to not use dielec-
tric grease for this series connector. For similar model series
connectors, the manufacturer should be contacted for confir-
mation before applying dielectric grease. A typical application
for this connector is on David Clark Intercom connections in
Aerial Work Platforms.
3121671
SECTION 7 - BASIC ELECTRICAL INFORMATION & SCHEMATICS
MOLEX CMC series connectors
The CMC connector family is a sealed, high-density connec-
tion system using matte-seal technology for CP 0.635 and 1.50
mm terminals. To guarantee IP6K7 and IP6K9 sealing, a seal
plug option is used. However, the low-force contacts cannot
displace dielectric grease and create electrical contact. It is
possible to use solvents (i.e. contact cleaner or mineral spirits)
for the removal of improperly applied dielectric grease. The
flexbox control modules from JDES employ this connector sys-
tem (for example).
7-7